Dosifying products

Mespack’s machine packaging fillers are designed to adapt our HFFS and VFFS machines to a wide variety of different fillers in order to obtain free and non-free flowing products, a variety of liquid thickness, pieces, and numerous other products.

Flowmeter - Liquids/Pasty

Magnetic Inductive Flowmeter Bopp & Reuther Mass Flowmeter Endress Hausser For conductive liquids and pasty products composed of: Pressurized hopper of 80 litres capacity made of sanitized 316 stainless steel including a two-way valve for product return Electronically controlled inductive measuring system that actuates directly on the filling nozzles Sanitized nozzles made of 316 stainless steel with pneumatic product cut-off system Electronic independent control box with alpha-numeric display to pre-set fill doses and statistical display of all necessary data Filling accuracy +/- 1%

Volumetric Cup Filler - Granules/Pieces

This system is used to fill free-flowing products by volume.
It is composed of a stainless steel hopper that contains the products, which flow by gravity into a rotary plate with built-in cups. The cups are telescopic and allow a certain range of volume, i.e. 1 to 10cc, 20 to 40cc. Various interchangeable sets of cups are available. Two types of systems are available: a mechanically driven unit commanded by a cam and a motorized clutch/brake unit. Fillers can be either simplex or duplex.

Auger Filler -Powder/Granules

This is a filling system for free and non-free flowing products as well as dusty and volatile products. There are two different versions of the auger filler: A/C motor with a clutch/brake system or D/C servo-motor. In both cases, the fill dose is pre-set in a counter on the touch screen. When using a clutch/brake unit, the accuracy is approximately +/-1’5% for most products. When using a servo-motor, the accuracy and the stop position is always exact with no inertias. The accuracy is around +/-1 for most products. The auger fillers are available in simplex, duplex, triplex or cuadruplex versions.

Pneumatic Piston Filler - Pasty

This type of filler is particularly relevant for thick and pasty products. The pump is composed of a 20 litres hopper made of stainless steel connected to an electrovalve. The electrovalve is synchronized with the filling machine through an electric signal, which enables a fill load to be done at each impulse. There are several pump sizes to cover fill doses from 1 to 250cc. The nozzles are customized according to the product characteristics and can be supplied with a suck-back or blow-off system. These filling pumps have various optional accessories as heated or pressurized hoppers for very thick products, hopper level detectors CIP facilities, etc.

Vibratory Filler -Granules/Pieces

This system is used for free flowing products that cannot be dosed using a conventional system, due to their characteristics.
The vibratory filler is composed of stainless steel vibratory bowls, which provide a continous flow of product into the vibratory channels which are synchronized to the machine cycle. Vibration intensity can be adjusted to the characteristics of the product.